Fence Rails

We stock half round rails and flat treated sawn rails suitable for post and rail fencing.  The half round rails are machined or peeled and treated. See the table below for the dimensions available.

Our rails are made from a quality softwood and then Tanalised through a pressure treatment process to ensure the preservative penetrates deep into the wood ensuring your rail will be protected against insects, rot and fungus.  Treated for in ground use, these rails can also be painted or stained.



Order code
3.66m length, 75mm Diameter
Machined half round
3.66m length, 85mm Diameter
Machined half round
3.66m length, 100mm Diameter
Machined half round
3.66m length, 75/100mm Diameter
Peeled and treated half round
3.66m length, 100/125mm Diameter
Peeled and treated half round
3m length, 38mm x 87mm section
Sawn and treated flat rail
3.6m length, 38mm x 87mm section
Sawn and treated flat rail

If you decide to cut this rail we recommend you retreat it with a wood preserve.

A delivery service is available at very reasonable rates and is charged based on your location.  All products can be collected during opening hours free of charge from the Timber Yard at Weston Subedge.

All our timber products are carefully sourced from FSC (Forestry Stewardship Council) and the PEFC (Programme for the Endorsement of Forest Certification) certified producers.

This means that we only utilise timber from managed forests where planting and renewal programmes are in operation, helping to protect and sustain our environment and air quality.