High Tensile Stock Wire HT8/80/15 and HT8/80/22

HT8/80/15 is most widely used for high tensile stock fence.
Specification. No of line wires 8
Overall height 800mm
Distance between vertical stay wires 150mm

HT8/80/22 is an alternative to HT8/80/15 with 220mm space between the vertical stay wires, this increased distance helps prevent sheep getting their heads stuck in the fence
Specification: No of line wires: 8
Overall height 800mm.
Distance between stay wires: 220mm.
Supplied in 100m rolls.


Order Code
800mm high HT8/80/15 - 100m roll
800mm high HT8/80/22 - 100m roll

High Tensile stock wire needs less posts than mild steel netting, does not need retightening and is quicker to erect.

A delivery service is available at very reasonable rates and is charged based on your location.  All products can be collected during opening hours free of charge from the Timber Yard at Weston Sub Edge.


Compliance with British and European Standards
BSEN 10218 – Steel Wire and Wire Products part 2 – General Wire Dimensions and Tolerances.
BSEN 10223 – Steel Wire and Wire Products for Fencing and Netting part 5 – Steel Wire Woven Hinged Joint and Knotted Mesh Fencing.
BSEN 10244 – Steel Wire and Wire Products Non-ferrous Metallic Coatings on Steel Wire part 2 – Zinc or Zinc Alloy Coatings (all Tornado products galvanised to class A).
Sustainability: All Tornado products are 100% recyclable.
Traceability: This fence is batch marked and can be traced back to point of manufacture