Estate Gate

The Estate with its extended curved hanging stile makes for an impressive entrance. This classic design benefits from a tapered top bar with superior hanging stile, joined using traditional hardwood stop dowelled mortice and tenon joints. Both its rails and vertical braces are reinforced by an extended diagonal brace (on gates 5’/ 1.525m and over). Made from specially selected timber with fewer smaller knots resulting in a more stable gate guaranteeing it is truly built to last. The Estate has a planed finish along with detailed chamfering to the stiles, top bar and rails giving a smooth, attractive finish.

Standard sizes in both Iroko and softwood range from 3’ (0.915m) to 12’ (3.66m) wide with a standard height of 3’3.5” (1.03m) to the top of the top rail.

Special sizes in both Iroko and softwood are available to order.

Categories: , Tags: , ,

Dimensions

Width of Gate
Softwood
Hardwood
3'0"
EGS3
EGI3
4'0"
EGS4
EGI4
5'0"
EGS5
EGI5
6'0"
EGS6
EGI6
7'0"
EGS7
EGI7
8'0"
EGS8
EGI8
9'0"
EGS9
EGI9
10'0"
EGS10
EGI10
11'0"
EGS11
EGI11
12"0
EGS12
EGI12

When ordering single gates please specify the hinge side when viewing from the front of the gate.  All gates can be supplied in pairs.  All prices are for the gates only – fittings are available at an extra cost.  Generally when ordering gates you will require a hinge set and a catch set.  Please review the related products on this page.

We recommend that a Drop Bolt is fitted to each Estate gate if hung as a pair plus a loop over latch.

 

 

A delivery service is available at very reasonable rates and is charged based on your location.  All products can be collected during opening hours free of charge from the Timber Yard at Weston Sub Edge.

The gate is manufactured sustainably and FSC certified.   By buying FSC wooden garden products you are helping to support responsible timber usage and forest management.